БЕСПЛАТНЫЙ анлок iPhone одним нажатием (Windows)

Инструкция с активацией YouTube и разлочкой (Вариант 1)

1 - Загрузите Apptap, Ibrickr, Paycay и Unlock.pxl
2 - Установите ПОСЛЕДНЮЮ версию iTunes, но не запускайте!
3 - Зажмите на телефоне Power и Home секунд на 20, пока он не начнет умолять вас подключить его к iTunes smile.gif
4 - Теперь iTunes предложит вам не активацию, а восстановление. Делайте, заодно обновляясь до прошивки 1.02
5 - Как восстановите - убивайте процессы itunes.exe и ituneshelper.exe
6 - Установите Apptap на компьютер.
7 - Используйте Apptap для установки Paycay. Этот скрипт активирует телефон и разлочит Ютуб.
8 - Установите Ibrickr на компьютер, запустите и увидете две кнопки - Ringtones и Applications. Давите Applications и выбирайте iunlock.pxl, запускайте и следуйте инструкциям на экране телефона.
9 - Как установите - жмите иконку разлочки в меню телефона и ждите минут 20.

|АРХИВ СО ВСЕМИ ПРОГРАММАМИ И ИНСТРУКЦИЕЙ:


 iPhone_Unlock_By_APTEM.rar  []  []  []

---

---

Iphone Software Unlock(Вариант 2)

First of all im gonna warn you make sure your running version 1.02 firmware.

Settings > General > About > Version. Modem Firmware should also say 03.14.08_G

Your phone will also need to be jailbroken you can use    ibrickr_v0.8.zip  []  []  [] for this!

When you have iBrickr running install the following.

• Community Sources
• OpenSSH
• BSD Subsystem (might take some minutes)

Next Use WinSCP (root/dottie) and copy the the following files to /usr/bin

• iUnlock
• ICE03.14.08_G.fls
• nor
• minicom
• bbupdater

You can find your iPhones ip address by using the wifi settings and picking your network and hitting the blue arrow will reveal your ip.

Now make a folder under /usr/ called local/etc

So you upload minirc.dfl to /usr/local/etc

Now using putty log back in with your login root/dottie

and run the following commands :

cd /usr/bin/

chmod +x iUnlock

launchctl unload -w /System/Library/LaunchDaemons/com.apple.CommCenter.plist

iUnlock ICE03.14.08_G.fls nor

Wait a while usually around 20minutes.

After this is complete in putty run

bbupdater -v

You should see issuing +xgendata... and a lot more stuff this is good!

now still in putty type

minicom

When everything loads ok type AT it should respond with OK

If all is good issue these commands next

AT+CLCK="PN",0,"00000000"

AT+CLCK="PN",2

if it gives a response with 0 your unlocked!

Now just run this command in putty!

launchctl load -w /System/Library/LaunchDaemons/com.apple.CommCenter.plist

AND YOUR UNLOCKED!

it should pause at Flashing firmware for 20minutes, this and wont move the percentage bar will not move as this is beta the new version will be a 2-5minute process.

This is still buggy and i will release a faster version in a few days as i havent slept.

Also when after complete hit the home button and restart iphone if you dont get signal